-40%

WEG VARIABLE FREQUENCY DRIVE CFW700A16P0T2DBN1 FOR 5HP MOTOR 200-240V

$ 237.6

Availability: 100 in stock
  • MPN: Does Not Apply
  • Rated Load: 200 HP
  • Brand: WEG
  • All returns accepted: ReturnsNotAccepted
  • Model: CFW700A16P0T2DBN1
  • Condition: New
  • Input Voltage: 240 V

    Description

    WEG VARIABLE FREQUENCY DRIVE CFW700A16P0T2DBN1 FOR 5HP MOTOR 200-240V new in the box and will be shipped out next business day after cleared payment. It was listed as an Open box because box was open for inspection and photos. Otherwise it is new and sealed. Refer to the photos.
    Adjustable-frequency drive is designed for variable-torque applications like pumps or fans. Features a PID controller that can be programmed in engineering units. The integrated power supply can be used with external transducers to measure flow and pressure. Keypad start-up guide makes installation easy. Dual DC bus chokes reduce harmonics and allow longer VFD lifetime.
    Item
    Variable Frequency Drive
    Max. HP
    5 hp
    Enclosure
    NEMA 1
    Input Voltage
    240V AC
    Max. Output Amps
    16 A
    Output Voltage
    240V AC
    Input Phase AC
    3
    Output Phase AC
    3
    With Bypass / No Bypass
    No Bypass
    With Line Contactor / No Line Contactor
    No Line Contactor
    Starting Torque
    100%
    Torque @ 1 Hz
    100 %
    Input Frequency
    50/60 Hz
    Output Frequency Range
    0 to 300 Hz
    Adjustable Acceleration Time
    0 to 999 sec
    Adjustable Deceleration Time
    0 to 999 sec
    Dynamic Braking
    Yes
    Height
    12.04 in
    Width
    5.71 in
    Depth
    8.94 in
    Control Type
    Keypad/Remote
    Key Pad Lockout
    Yes
    Start/Stop Control
    Programmable
    Protection
    Overcurrent/Short Circuit, Under/Overvoltage, Phase Loss, VFD Overload, Motor Overload, Braking Resistor Overload, IGBTs Overload, Phase-to Ground Short Circuit at the Output, Motor Over speed
    Control Method
    Linear and Adjustable V/Hz, Voltage Vector, Sensor less Vector, and Closed Loop Vector
    Accepts Input Control Signal
    Yes
    Display Type
    LCD
    Displays
    LCD
    Digital Readout
    Yes
    For Use With
    3-Phase Induction Motor
    Standards
    UL, cUL, CE
    Thanks for looking.